Laith Abdullah Al-Juboori, Thomas Niendorf
Analysis of mechanical properties of Nickel-based superalloy (Inconel 718) components fabricated by additive manufacturing using electron beam melting is presented for two conditions: as-built and heat-treated, and for different sets of processing parameters. The average yield strength increased from 980 to 1180 MPa, and the ultimate strength increased from 1160 to 1350 MPa, while microhardness increased from 410 HV in the as-built condition to 470 HV in the heat-treated condition. However, the corresponding elongation at fracture decreased from 8.2 pct for the as-built components to 6.5 pct for heat-treated components. The mechanical behavior is mostly independent of the processing parameters applied, enabling achievement of higher built-up rates by means of higher scanning velocities.
@article{06aa520f-14c6-4fe2-83f2-87e819ddbf2e,
title={On the Tensile Properties of Inconel 718 Fabricated by EBM for As-Built and Heat-Treated Components},
author={Laith Abdullah Al-Juboori and Thomas Niendorf},
year={2018},
language={en}
}TY - JOUR TI - On the Tensile Properties of Inconel 718 Fabricated by EBM for As-Built and Heat-Treated Components AU - Laith Abdullah Al-Juboori AU - Thomas Niendorf PY - 2018 LA - en ER -
Ian Cameron, Mitren Sukhram
This book delves into the intricate processes involved in blast furnace ironmaking, emphasizing the analysis, control, and optimization of operations.
Deepak Malhotra
This work discusses the essential components of a rigorous auditing process aimed at enhancing metallurgical plant performance. The objective is to id
Robert A. Francis
This document serves as a comprehensive introduction to the metallurgy of steel and its alloys, focusing on various aspects of iron and steel manufact
Hao Cui, Corby G Anderson
This study provides an up-to-date review of recycling of printed circuit boards (PCBs), specifically in hydrometallurgical treatment. Waste printed ci
Santhana Krishnan, Nor Syahidah Zulkapli
Fast industrialization has increased the demand for heavy metals, while high-grade ore natural reserves are diminishing. Therefore, alternative source
C.N. Mpinga, J.J. Eksteen
Platinum Group Metals (PGMs), often with associated gold, have very few occurrences where they are present in an ore deposit at economically extractab