PDF

Endurance test on a single cell of a nov

J. Soler, T. González

2026enmolten carbonate fuel cellcathode materialsnickel oxidecerium oxidecorrosionendurance testing

Abstract

Language:

The molten carbonate fuel cell (MCFC) is expected to be an efficient device for the conversion of chemical energy in the near future. However, one of the major limits to the lifetime is the dissolution of the nickel oxide cathode in the electrolyte. This problem can be overcome by the addition of new compounds to the nickel oxide. In this way, the performance and the endurance of a new Ni–Ce cathode for MCFC has been tested and the results compared to a commercial nickel cathode. The polarisation curves were measured in order to check the degradation of the cell performance with time. The results showed a better performance with the novel cathode material (136 mW/cm² at 200 mA/cm² during 2100 h) than the commercial one (the voltage decreased from 120 to 108 mW/cm² at 150 mA/cm² in 1000 h). The better performance of Ni–Ce cathode with respect to the Ni one can be attributed to the good effect of cerium in the cathode. The change in the nickel crystalline structure reduces the dissolution of nickel in the electrolyte and implies a greater endurance of the cell. The current–voltage curves were measured and showed the same trend for both cells. Postmortem analyses were done in order to characterise the cells. As a conclusion, the addition of cerium can be beneficial to overcome the dissolution of the nickel cathode in the electrolyte, which is considered one of the major limits to the lifetime of a MCFC.

Download

Cite This Work

@article{072d246c-7812-4249-8b32-723e65c148a1,
  title={Endurance test on a single cell of a nov},
  author={J. Soler and T. González},
  year={2026},
  language={en}
}
TY  - JOUR
TI  - Endurance test on a single cell of a nov
AU  - J. Soler
AU  - T. González
PY  - 2026
LA  - en
ER  -

Similar Items

Metal Casting Processes

Unknown, Unknown

This chapter discusses metal casting processes, highlighting the diversity and common characteristics among them. The objective is to elucidate the fu

2023enPDF

The Nature of Solid Iron and Its Grain Structure

Unknown, Unknown

This study focuses on the fundamental characteristics of solid iron, which is predominantly composed of iron atoms and provides a basis for understand

2023enPDF

842063941 SX configuration

2026enPDF

758686865 Procedes metallurgique speciaux

Ir. Méshac KIME ILUNGA

Ce document traite des procédés métallurgiques spéciaux, en mettant particulièrement l'accent sur l'extraction liquide-liquide, un processus mis au po

2026enPDF

729490895 TFC Jordi kayombo

Copper solvent extraction units at large hydrometallurgical plants face constraints in metal recovery, phase disengagement, and reagent consumption, d

2026enPDF

790734466 METALLURGIE EXTRACTIVE DU CUIVRE hydrome tallurgie

Non spécifié

L'hydrométallurgie du cuivre, principalement axée sur les minerais oxydés facilement solubles, s'applique également aux minerais sulfurés ou mixtes ap

2026enPDF