Xinming Chen, Xiangfei Jin
Paste and thickened tailings (PTT) technology can improve the utilization and management of tailings from processing plants. The pore size distribution (PSD) and microstructure evolution affected by the rake shear in thickening tailings beds are essential to produce a high-density tailings underflow. Continuous thickening and computed tomography (CT) scanning tests were conducted to study the PSD with and without shear. The pore morphology was studied to reveal the shearing-dewatering performance of the tailings bed. The results show that at a flocculant solution concentration of 0.01 wt % and a feed slurry concentration of 10 wt%, the underflow concentration with and without shear can reach 58.5 wt %and 55.8 wt %, respectively. The CT image reconstruction models demonstrated that the porosity of the sheared tailings bed increased with the bed height. When the bed height increased from 2.5 to 10 cm, the porosity increased from 35.1% to 41.9%, the pore fractal dimension increased from the range 1.8–1.95 to the range 2.1–2.15, and the pore quantity decreased by 21.39%. The average pore volume increased with increasing height by 13.93%, 16.57% and 12.07%. The pore structure became more complex with the bed height, and the connectivity between pores increased to form water-flow channels, which were beneficial to the drainage of sealed water.
@article{0bd319cd-16d6-4f41-82b4-bc204310b148,
title={Pore Connectivity and Dewatering Mechanism of Tailings Bed in Raking Deep-Cone Thickener Process},
author={Xinming Chen and Xiangfei Jin},
year={2020},
language={English}
}TY - JOUR TI - Pore Connectivity and Dewatering Mechanism of Tailings Bed in Raking Deep-Cone Thickener Process AU - Xinming Chen AU - Xiangfei Jin PY - 2020 LA - English ER -
John Chadwick
This article surveys contemporary technological developments aimed at enhancing the efficiency, selectivity, and sustainability of gold extraction and
Osvaldo Pavez, Pablo Herrera
Copper slag flotation was studied on an industrial scale at a concentrator plant in the region of Atacama, Chile. This study consisted of the physical
Cleophace Ngoie Mpinga
The thesis investigates alternative extraction strategies for platinum group metals (PGMs) from low-grade, high-chromium oxidized ores, which are incr
Gupta, A. and D.S. Yan
This work provides a comprehensive introductory treatment of mineral processing with a strong emphasis on the practical design and operation of benefi
FATHI HABASHI
In the past few years, extractive metallurgy has been advancing gradually, despite the absence of remarkable new ideas. This paper aims to summarize t
Copper oxide minerals are normally extracted by acidic leaching followed by copper recovery with solvent extraction and electrowinning. However, coppe