Khalid Alshaybani, Khaled M. Chahrour
This study investigates the synergistic effect of incorporating graphene oxide (GO) nanosheets and ZrO2 nanoparticles into an epoxy coating to enhance corrosion protection and extend the service life of stainless steel in saline environments. The micromorphological, structural, thermal, hydrophobic, and mechanical properties of epoxy, ZrO2/epoxy, and GO/ZrO2/epoxy coatings were systematically investigated using FESEM, FTIR, XRD, thermogravimetric analysis, water contact angle measurements, and microhardness testing. Corrosion resistance was evaluated using potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS). Compared with pure epoxy and ZrO2/epoxy coatings, the GO/ZrO2/epoxy nanocomposite exhibited superior corrosion protection, achieving a corrosion current density of 16.8 nA/cm2, a corrosion rate of 0.001 mpy, and a charge transfer resistance of 923000 Ω. The enhanced performance is attributed to the dual barrier effect of GO nanosheets, which provide impermeability and mechanical reinforcement, combined with reduced coating porosity and blocked corrosive pathways induced by ZrO2 nanoparticles. Long-term corrosion behavior was evaluated after 72 h of immersion in saline solution. The hybrid coating maintained a low corrosion current density of 24.7 nA/cm2, corrosion rate of 0.0013 mpy, and charge transfer resistance of 913200 Ω, demonstrating excellent durability and confirming the long-term protective capability of the GO/ZrO2/epoxy nanocomposite coating system.
@article{165cf0b2-e1f5-460e-9019-f4716b92dac5,
title={2026 Alshaybani GO ZrO2 Epoxy Corrosion},
author={Khalid Alshaybani and Khaled M. Chahrour},
year={2026},
language={en}
}TY - JOUR TI - 2026 Alshaybani GO ZrO2 Epoxy Corrosion AU - Khalid Alshaybani AU - Khaled M. Chahrour PY - 2026 LA - en ER -
This paper addresses the challenge of assessing the feasibility of wind power plant projects at sites with insufficient or no local historic wind data
Important advances in electrochemical engineering technology over the last three decades have fostered the development of a lternative methods to alle
Increasing volumes of waste printed circuit boards from obsolete electronic equipment posed escalating environmental risks and resource losses due to
The leachability tests for manufacturing scrap TV boards (STVB) have indicated the release of metals beyond the limit levels with potential problems f