Samane Zarei, Hamid Ganji
Optimization of Claus sulfur recovery plants requires a reliable kinetic model to describe the reaction furnace and waste heat boiler. In order to develop a suitable kinetic model for prediction of reaction furnace and waste heat boiler effluents, several reaction schemes were tested and the best reaction set was selected. The kinetic parameters of the best reaction scheme were optimized and different reactor networks were analyzed using the optimum reaction set. The modified model results were in good agreement with the experimental measured plant data both before and after waste heat boiler (The mean absolute errors were 7.62% and 7.88% respectively). In addition, the effects of increasing ammonia and oxygen content of feed, and air to acid gas ratio on reaction furnace effluents were investigated through various case studies. An optimization study was performed to control the operating variables of an operating sulfur recovery unit in order to obtain optimum conditions (including maximum reaction furnace temperature), maintain H2S to SO2 ratio at constant 2 and lower COS emissions from waste heat boiler.
@article{2791ae37-362a-4a7a-99c0-c73262565a7f,
title={Kinetic Modeling and Optimization of Claus Reaction Furnace},
author={Samane Zarei and Hamid Ganji},
year={2016},
language={en}
}TY - JOUR TI - Kinetic Modeling and Optimization of Claus Reaction Furnace AU - Samane Zarei AU - Hamid Ganji PY - 2016 LA - en ER -
Ian Cameron, Mitren Sukhram
This book delves into the intricate processes involved in blast furnace ironmaking, emphasizing the analysis, control, and optimization of operations.
Jennifer Namias, Dr. Nickolas J. Themelis
This study explores the future of electronic waste recycling in the United States, addressing the challenges and proposing domestic solutions. The rap
Deepak Malhotra
This work discusses the essential components of a rigorous auditing process aimed at enhancing metallurgical plant performance. The objective is to id
İbrahim Sönmez, Kemal Şahbudak
Chalcopyrite (CuFeS2) is commonly used ore in the production of copper, but leaching of this ore is very slow and inefficient due to “passivation” dur
Robert A. Francis
This document serves as a comprehensive introduction to the metallurgy of steel and its alloys, focusing on various aspects of iron and steel manufact
Hao Cui, Corby G Anderson
This study provides an up-to-date review of recycling of printed circuit boards (PCBs), specifically in hydrometallurgical treatment. Waste printed ci