Iman Zaidan Alshih Yahya
Given that low carbon steels have favourable mechanical properties, they are widely used in power plant components, oil and gas pipelines, and armor structures. However, the relationship between a steel's structure and mechanical properties can occasionally be negatively impacted by the existence of ferrite and pearlite phases in its microstructure. One of the most crucial aspects of engineering metallurgy is the heat treatment of steels, which improves a variety of mechanical and physical characteristics that are useful in many structural applications. The heating and cooling of an alloy or metal while it is solid in order to refine its grain size and other properties and create the necessary microstructures is known as heat treatment. This paper will use distilled water as a cooling medium at various temperatures to perform repeated heat treatments. Comparing the impact load resistance of the original and treated specimens is the goal, as is the impact of multiple heat treatments and the use of distilled water as a medium for cooling at different temperatures. The findings of an Excel program study show that the heat-treated samples had a greater impact resistance value than the untreated ones. The strong martensitic network alloys created by heat treatment procedures are the main factor contributing to the increase in impact load resistance. The average pendulum angle values of the six heat-treated compounds were found to have a higher elevation angle than the average values of the original group. There was the least amount of decrease from the average value of the second group, which was 0.93%. The average toughness values of the six heat-treated groups increased in comparison to the original group's average values, with the second group experiencing the largest percentage increase (11.96%). Based on the difference in coolant temperatures, the group that was cooled in distilled water at zero temperature had the best toughness value.
@article{312347be-ceb8-4a56-929f-3d50b4beb1b0,
title={Impact Load Resistance of Steel after Heat Treatment and Quenching with Distilled Water },
author={Iman Zaidan Alshih Yahya},
year={2024},
language={en}
}TY - JOUR TI - Impact Load Resistance of Steel after Heat Treatment and Quenching with Distilled Water AU - Iman Zaidan Alshih Yahya PY - 2024 LA - en ER -
Mirjana Filipović, Željko Kamberović, Marija Korać
Experimental results indicate that the volume fraction of the carbide phase, carbide size and distribution had an important influence on the wear resi
Robert A. Francis
This document serves as a comprehensive introduction to the metallurgy of steel and its alloys, focusing on various aspects of iron and steel manufact
Aleksandar Mihajlović, Željko Kamberović, Marija Korać, Milorad Gavrilovski, Nikola Jovanović
Technological procedure of slow cooling slag from primary copper production is applied in the purpose of copper recovery in the level of 98.5% to blis
M. Filipovic, Z. Kamberovic, M. Korac, and M. Gavrilovski
The objective of this investigation was to set down (on the basis of the results obtained by the examination of white cast iron alloys with different
Mirjana FILIPOVIC, Endre ROMHANJI and Zeljko KAMBEROVIC
The chemical composition and morphology of M7C3 eutectic carbides in 19 mass% Cr–2.8 mass% C white iron with up to 4.7 mass% V additions have been stu