Xiaohong Li, Jianchao He
In this paper, the fracture toughness of the thermo-mechanically affected zone (TMAZ) and the weld zone (WZ) of the TC17 titanium alloy linear friction welding joint was studied. The relationship between microstructure and fracture toughness of the joint, as well as the morphologies of the joint microstructure and fracture were investigated. The results indicate that after heat treatment, there was no significant difference in hardness between the WZ and the TMAZ of the joint, which was about 420 HV. However, the microstructures of the different zones of the joint were significantly different. The TMAZ was composed of coarse grains having an internal basket-shaped α phase with an uneven grain size, while the WZ was composed of relatively uniform fine grains and contained a sheet-like α phase. The fracture toughness of the TMAZ was found to be higher than that of the WZ, indicating that the microstructure of the joint had a significant impact on the fracture toughness. In addition, the fracture resistance of the TMAZ with coarser grains and uneven microstructure was better than that of the WZ with fine grains and uniform microstructure.
@article{3128fa1f-43ee-4214-b4be-0c40cf957333,
title={Study of the Microstructure and Fracture Toughness of TC17 Titanium Alloy Linear Friction Welding Joint},
author={Xiaohong Li and Jianchao He},
year={2019},
language={English}
}TY - JOUR TI - Study of the Microstructure and Fracture Toughness of TC17 Titanium Alloy Linear Friction Welding Joint AU - Xiaohong Li AU - Jianchao He PY - 2019 LA - English ER -
Denis Pustovoytov, Alexander Pesin
Asymmetric sheet rolling is a process used when there are differences in any technological parameters in the horizontal plane across the width of the
Jean-Philippe Monchoux, Alain Couret
After a few decades of increasing interest, spark plasma sintering (SPS) has now become a mature powder metallurgy technique, which allows assessing i
Reynier I. Revilla, Donovan Verkens
Metal additive manufacturing (MAM), also known as metal 3D printing, is a rapidly growing industry based on the fabrication of complex metal parts wit
Gorazd Lojen, Tomaž Vuherer
Appropriate post weld heat treatment (PWHT) is usually obligatory when creep resistant steels are welded for thermal power plant components that opera
Tae-Hoon Nam, Eunsol An
The present study is to investigate the effect of post heat treatment on the microstructures and mechanical properties of a submerged-arc-welded 304 s
Petro Loboda, Constantine Zvorykin
In this article, structural features of Ti-TiB and (α+β) Ti alloys in the initial state, in the weld and in the heat-affected zone of electron beam we