Charlotte B. Braungardt, Eric P. Achterberg
The Rio Tinto and Rio Odiel drain the Iberian Pyrite Belt, an important metal-rich sulphide deposit. The rivers are highly acidic (pH 2.2–3.6) and have milli-molar SO4 and Fe concentrations and micro-molar Co, Cu, Mn and Zn concentrations. Observed dissolved metal levels were at a maximum during autumn and early winter surveys (e.g., Rio Tinto: 460–856 mM Cu), and lower in late winter, spring and summer (121–175 mM Cu). This variability is attributed to the production of concentrated acid mine drainage (AMD) during periods of enhanced microbial activity at higher temperatures in summer, and a subsequent run-off of the AMD into the rivers with the first rain in the autumn. Lower temperatures and dilution by winter floods resulted in a reduction of river metal concentration towards the end of the wet season. Metal distributions in the estuarine mixing zones of the Tinto and Odiel were governed by the acidity. The lack of metal transfer from the dissolved to the particulate phase in the low salinity region is attributed to the electrostatic repulsion between the metal cations and positive charges on particle surfaces, and/or to the protonation of adsorption sites at low pH. Dissolved Pb was an exception and showed marked removal in the low salinity zone at low pH (pH 2.5), due to its particle reactive nature. The gross metal fluxes from the Rio Tinto and Rio Odiel are important on a global scale, for example amounting to 8.1 and 1.6% of the estimated global riverine dissolved Zn and Cu fluxes. The fluxes of metals from the estuary contribute to enhanced dissolved metal concentrations observed in the Gulf of Cadiz.
@article{35d717ed-3bc2-45b5-8b61-87a7a9bac309,
title={Metalgeochemistryinamine-pollutedestuarinesysteminSpain},
author={Charlotte B. Braungardt and Eric P. Achterberg},
year={2003},
language={en}
}TY - JOUR TI - Metalgeochemistryinamine-pollutedestuarinesysteminSpain AU - Charlotte B. Braungardt AU - Eric P. Achterberg PY - 2003 LA - en ER -
Chiranjib Kumar Gupta
This book provides a comprehensive overview of the field of chemical metallurgy, addressing both common and less common metals. The objective of the v
A. Ryan, E. Johanson
The design of process plants for feasibility studies must address several key objectives, including feasibility and constructibility, while focusing o
The Australasian Institute of Mining and Metallurgy
This conference, held in Perth, Western Australia, focuses on the latest advancements in metallurgical processing plant design and operational strateg
This paper addresses the challenge of assessing the feasibility of wind power plant projects at sites with insufficient or no local historic wind data
Important advances in electrochemical engineering technology over the last three decades have fostered the development of a lternative methods to alle