Mehmet Çopur, Cengiz Özmetin
The Taguchi method was used to determine the optimum conditions for the dissolution of roasted zinc sulphide concentrate in H2SO4 solutions. The experimental parameters and their ranges were between 13 and 55°C for the reaction temperature, 0.1–0.3 g cm−3 for solid-to-liquid ratio, 24.02–48.77% for acid concentration (by mass), 10–50 min for reaction time, and 300–800 rpm for stirring speed. The optimum conditions were found to be 55°C, 0.1 g cm−3, 37.26% (by mass) H2SO4, 50 min and 300 rpm, respectively. Under these conditions, the dissolution of Zn + Cu in H2SO4 solutions was approximately 99%. In addition, some experiments were performed for alternative parameter levels, to minimise Fe dissolution while keeping the dissolution of Zn + Cu around maximum.
@article{39478341-ae9e-46c3-8461-935fdbfd5b85,
title={Optimization study of the leaching of roasted zinc sulphide concentrate with sulphuric acid solutions},
author={Mehmet Çopur and Cengiz Özmetin},
year={2004},
language={en}
}TY - JOUR TI - Optimization study of the leaching of roasted zinc sulphide concentrate with sulphuric acid solutions AU - Mehmet Çopur AU - Cengiz Özmetin PY - 2004 LA - en ER -
İbrahim Sönmez, Kemal Şahbudak
Chalcopyrite (CuFeS2) is commonly used ore in the production of copper, but leaching of this ore is very slow and inefficient due to “passivation” dur
The leachability tests for manufacturing scrap TV boards (STVB) have indicated the release of metals beyond the limit levels with potential problems f
Printed circuit boards (PCBs) from electronic gadgets at the end of their useful life period are currently being dumped in landfills or incinerated, c
Ian Cameron, Mitren Sukhram
This book delves into the intricate processes involved in blast furnace ironmaking, emphasizing the analysis, control, and optimization of operations.
C.N. Mpinga, J.J. Eksteen
Platinum Group Metals (PGMs), often with associated gold, have very few occurrences where they are present in an ore deposit at economically extractab