Nolwenn Fougeron, Alessio Trebbi
Finite element analysis of soft tissues is a well-developed method that allows estimation of mechanical quantities (e.g., stresses, strains). A constitutive law has to be used to characterise the individual tissues. This is complex as biological tissues are generally visco-hyperelastic, anisotropic, and heterogenous. A specific characteristic, their nearly incompressibility, was well reported in the literature, but very little effort has been made to compare volume variations computed by the simulations with in vivo measurements. In the present study, volume changes of the fat pad during controlled indentations of the human heel region were estimated from segmented medical images using digital volume correlation. Indentations were repeated with high and mild intensity normal and shear loads. The experiment was reproduced using finite element modelling with several values of Poisson’s ratio for the fat pad, extracted from literature values (from 0.4500 to 0.4999). Estimated fat pad volume changes were compared to the measured ones to assess the best value of Poisson’s ratio in each indentation case. The impact of the Poisson’s ratio on the Jacobian of the deformation gradient and the volumetric strains was also computed. A single value of Poisson’s ratio could not fit all the indentation cases. Estimated volume changes were between 0.9% - 11.7%.
@article{3c2c5804-b4ee-4d39-8782-b9b180a47550,
title={Current Poisson’s ratio values of finite element},
author={Nolwenn Fougeron and Alessio Trebbi},
year={2023},
language={English}
}TY - JOUR TI - Current Poisson’s ratio values of finite element AU - Nolwenn Fougeron AU - Alessio Trebbi PY - 2023 LA - English ER -
Yevhen Synehin, Volodymyr Ruban
This study investigates the process that forms centerline porosity in the axial zone of a continuously cast steel billet during its hardening. The tas
Öznur KILIÇ, Prof. Dr. Kerem Altuğ GÜLER
In this study, different melting and refining strategies were applied to G17CrMo5-5 cast steel in order to evaluate their influence on inclusion evolu
Fuhai LIU, Tantong SHI
The study explores the application of the CO2 bottom-blowing method in the 120t LF (Ladle Furnace) refining process to improve metallurgical outcomes.
Erhan SELÇUK, Kerim Emre ÖKSÜZ
This study investigates the effect of the vibratory assisted severe surface plastic deformation (VA–SPD) method on the mechanical properties of Ti6Al4
Zhiyuan Sun, Renjie Su
Bearing steel, as the core material of key transmission and support components, has its surface performance directly determining the reliability, stab
Kaiyu Zhou, Somasekhara Goud Sontti
The massive volume of oil sands tailings has been one of the most challenging environmental issues. In this work, we experimentally explore a simple a