Fei Zeng, Jo Van Caneghem
Recycling of vanadium (V) and tungsten (W) from spent WO3-V2O5/TiO2 selective catalytic reduction (SCR) catalysts is critical for resource circularity and environmental protection. This study investigates the application of mechanochemical processing (MCP) to enhance the alkaline leaching, comparing (i) mechanochemical activation (ACT; milling before leaching) and (ii) mechanochemical leaching (MCL; simultaneous milling and leaching) against a non-activated control (NAC). In NAC, temperature dominates extraction for both V and W, with NaOH concentration and liquid-to-solid ratio as secondary factors. MCP improves extraction under most conditions, notably, MCL delivered the highest performance: at high milling intensity and small media, V recovery reached ~99 % and W ~ 66 % at ≤ 75 °C. Kinetic analysis showed that classical shrinking-core models fail to capture the behavior, whereas a stretched-exponential (Avrami/Weibull) law describes the rapid initial dissolution and decelerating tails, consistent with heterogeneous, overlapping pathways. Mechanochemically induced microstructural changes lowered apparent activation energies (V: ~34 to ~11 kJ/mol; W: ~67 to ~62 kJ/mol) and reduced kinetic heterogeneity, particularly in MCL. Overall, MCP enables low-temperature, energy-efficient recovery of critical metals from spent SCR catalysts and reconfigures the controlling leaching mechanisms.
@article{3f7afd15-f95c-4147-9228-3e5e6506af86,
title={2026 Zeng Alkaline Leaching of Spent SCR Catalysts},
author={Fei Zeng and Jo Van Caneghem},
year={2026},
language={en}
}TY - JOUR TI - 2026 Zeng Alkaline Leaching of Spent SCR Catalysts AU - Fei Zeng AU - Jo Van Caneghem PY - 2026 LA - en ER -
Important advances in electrochemical engineering technology over the last three decades have fostered the development of a lternative methods to alle
Increasing volumes of waste printed circuit boards from obsolete electronic equipment posed escalating environmental risks and resource losses due to
Printed circuit boards (PCBs) from electronic gadgets at the end of their useful life period are currently being dumped in landfills or incinerated, c
Blair Burwell
The exhaustion of current vanadium sources and the emergence of new applications are driving the need for innovative methods of extraction. The aim of
Sadia Ilyas, Jae-chun Lee
The feasibility of biometallurgical processing for recovering heavy metals, precious metals, and rare earth elements from waste electrical and electro