Agus Kuncaka, Eko Sugiharto
Study on a new road of copper electroextraction to make use thesolid mixture of CuFeS2 and CaCO3 as anode has been done. The aim of these research was to determine reaction kinetic and faradic efficiency of anodic copper dissolution and catodic copper precipitation. A solid mixture of CuFeS2 and CaCO3 at weight ratio 9:1 was functioned as anode. Electrolysis was carried out at 1.5 mA by varying times of 30, 60, 120, and 240 minutes in Na2SO4 0.5 M + H2SO4 0.01 M electrolyte. The quantity of copper at the electrolyte and cathode was analyzed by Atomic Absorption Spectrophotometer (AAS). The result of these research showed that copper was deposited in the cathode simultaneously with anodic dissolution. The kinetic of copper dissolution follow zero order with rate constant of 5.10-6 mg/second. The faradic efficiency of copper dissolution and precipitation for those various time respectively were 17.31%; 14.00%; 11,16%; 62.31%; and 1.60%; 8.61%; 7.59%; 60.63%.
@article{44d2b8b4-7cb6-4360-8b2a-a5e7d26f1494,
title={EXTRACTION OF COPPER ELECTROLYTICALLY BY},
author={Agus Kuncaka and Eko Sugiharto},
year={2026},
language={en}
}TY - JOUR TI - EXTRACTION OF COPPER ELECTROLYTICALLY BY AU - Agus Kuncaka AU - Eko Sugiharto PY - 2026 LA - en ER -
Huan Li, Elsayed Oraby, Jacques Eksteen
Waste printed circuit boards (WPCBs) are a complicated and valuable fraction of electric and electronic waste. The recycling of them is critical to av
This paper addresses the challenge of assessing the feasibility of wind power plant projects at sites with insufficient or no local historic wind data
Important advances in electrochemical engineering technology over the last three decades have fostered the development of a lternative methods to alle