PDF

Low flux submerged membrane bioreactor t

Bui Xuan Thanh, Chettiypan Visvanathan

2026enmembrane bioreactorleachatefoulingwastewater

Abstract

Language:

A submerged membrane bioreactor was employed to treat high strength leachate generating from a solid waste transfer station. The organic loading rate (OLR) ranged from 2 to 10 kg COD/m3 day. Results show that 97% removal efficiency of COD was achieved at flux of 2.4 LMH. The highest removal of ammonia and total nitrogen was 92.0 ± 1.5% and 88.0 ± 2.0% respectively at flux of 3.8 LMH. Fouling rates were observed to be 0.075; 0.121; 1.386 and 6.374 kPa/day for the fluxes of 1.2; 2.4; 3.8 and 5.1 LMH respectively. Membrane fouled very slowly at low flux operation. The sustainable flux was identified to be less than 2.4 LMH for treating high strength leachate. It reveals less fouling was able to achieve for high strength wastewater by reducing the membrane flux.

Download

Cite This Work

@article{456bbb12-6cfa-4217-8064-92b1c4bc4faa,
  title={Low flux submerged membrane bioreactor t},
  author={Bui Xuan Thanh and Chettiypan Visvanathan},
  year={2026},
  language={en}
}
TY  - JOUR
TI  - Low flux submerged membrane bioreactor t
AU  - Bui Xuan Thanh
AU  - Chettiypan Visvanathan
PY  - 2026
LA  - en
ER  -

Similar Items

Electrochemical techniques for a cleaner

Important advances in electrochemical engineering technology over the last three decades have fostered the development of a lternative methods to alle

2026enPDF

Optimization of Integrated Steel Plant R

This paper addresses the challenge of assessing the feasibility of wind power plant projects at sites with insufficient or no local historic wind data

2025enPDF

Design for Recovery of Precious and Base

2026enPDF

Environmental and Human Health Risks Ass

2026enPDF

The Recovery of Precious and Base Metals

Increasing volumes of waste printed circuit boards from obsolete electronic equipment posed escalating environmental risks and resource losses due to

2026enPDF

Treatment of manufacturing scrap TV boar

The leachability tests for manufacturing scrap TV boards (STVB) have indicated the release of metals beyond the limit levels with potential problems f

2026enPDF