C. Ahmed Basha, J. Sendhil
Electrochemical oxidation of organic pollutants present in the dye-bath and wash water effluents from the textile industry was carried out in batch, batch recirculation and recycle reactor configurations under different conditions of current density, treatment duration, effluent flow rate and electrode specific surface. COD reduction of 52.63% to 82.61% could be obtained when the Procion blue dye-bath effluent was treated in the batch reactor for 8 h. In batch recirculation reactor, the reduction was 94.3% for dye-bath effluent and 91.4 for wash water effluent after 6 h of operation at a current density of 50 Am–2 and flow rate of 100 L h–1. The specific energy consumption was found to be 4.32 kWh (kg COD–1) for dye-bath effluent and 83.8 kWh (kg COD–1) for wash water effluent. The results for wash water effluent under continuous operation of recycle reactor conditions showed 52.86% of COD removal at recycle flow rate of 100 L h–1 with discharge flow rate of 3 L h–1. The specific energy consumption was found to be 119.1 kWh (kg COD–1).
@article{461f2647-85bc-41d3-a15d-26810fd833c3,
title={Electrochemical degradation of textile d},
author={C. Ahmed Basha and J. Sendhil},
year={2026},
language={en}
}TY - JOUR TI - Electrochemical degradation of textile d AU - C. Ahmed Basha AU - J. Sendhil PY - 2026 LA - en ER -
Important advances in electrochemical engineering technology over the last three decades have fostered the development of a lternative methods to alle
Unknown, Unknown
This chapter discusses metal casting processes, highlighting the diversity and common characteristics among them. The objective is to elucidate the fu
Unknown, Unknown
This study focuses on the fundamental characteristics of solid iron, which is predominantly composed of iron atoms and provides a basis for understand
Ir. Méshac KIME ILUNGA
Ce document traite des procédés métallurgiques spéciaux, en mettant particulièrement l'accent sur l'extraction liquide-liquide, un processus mis au po
Copper solvent extraction units at large hydrometallurgical plants face constraints in metal recovery, phase disengagement, and reagent consumption, d