Abdullah Seyrankaya, Barıs ¸ Ozalp
In this study, dehydration of sodium carbonate monohydrate (Na2CO3·H2O) (SCM) in a microwave (MW) field with silicon carbide (SiC) as an indirect heating medium was investigated. SCM samples containing up to 3% free moisture were placed in the microwave oven. The heating experiments showed that SCM is a poor microwave energy absorber for up to 6 minutes of irradiation at 800 W of microwave power. The heat for SCM calcination is provided by SiC, which absorbs microwave energy. The monohydrate is then converted to anhydrous sodium carbonate on the SiC plate by calcining, which involves removing the crystal water through heating of the monohydrate to temperatures exceeding 120 °C. This calcination results in a solid phase recrystallization of the monohydrate into anhydrous form. Furthermore, the process demonstrated that dehydration of SCM, in the context of indirect heating, can be accelerated by increasing the microwave field power.
@article{4b71a1e5-7e1d-463b-9c86-6e2db842c22f,
title={Dehydration of sodium carbonate monohydrate with indirect microwave heating},
author={Abdullah Seyrankaya and Barıs ¸ Ozalp},
year={2006},
language={en}
}TY - JOUR TI - Dehydration of sodium carbonate monohydrate with indirect microwave heating AU - Abdullah Seyrankaya AU - Barıs ¸ Ozalp PY - 2006 LA - en ER -
Chiranjib Kumar Gupta
This book provides a comprehensive overview of the field of chemical metallurgy, addressing both common and less common metals. The objective of the v
FATHI HABASHI
In the past few years, extractive metallurgy has been advancing gradually, despite the absence of remarkable new ideas. This paper aims to summarize t
Cleophace Ngoie Mpinga
The thesis investigates alternative extraction strategies for platinum group metals (PGMs) from low-grade, high-chromium oxidized ores, which are incr
John Chadwick
This article surveys contemporary technological developments aimed at enhancing the efficiency, selectivity, and sustainability of gold extraction and
A. Ryan, E. Johanson
The design of process plants for feasibility studies must address several key objectives, including feasibility and constructibility, while focusing o