PDF

Nickel carriers in laterite ores and the

Pedro Paulo Medeiros Ribeiro, Reiner Neumann

2026ennickellaterite oressulfation-roasting-leachingRietveld methodmineral extraction

Abstract

Language:

The influence of nickel carriers minerals, contained in three different laterite ore samples, on their extraction by a sulfatoin-roasting-leaching process, is investigated in this paper. X-ray diffraction, scanning electron microscopy coupled to energy dispersive spectroscopy and chemical analyses by atomic absorption spectrometry were the techniques employed to characterize ore samples and leaching solid residues. Phase quantification was carried out by the Rietveld method. Nickel recovery showed to be strongly dependent on the minerals to which it was associated. Unlike expected, almost all the nickel contained in silicate minerals was extracted; however, some silicates, especially serpentine, interfere in nickel extraction when it is predominantly associated with the octahedral sites of goethite. The highest nickel recovery (93.0%) was achieved with the sample in which goethite was the main nickel carrier and its serpentine content was the lowest. The worst nickel recovery (76.19%) was obtained with the sample where goethite was the predominant mineral phases and the amphibole phase. Cobalt recoveries were never higher than 81.0% for the three processed samples.

Download

Cite This Work

@article{620488a0-6177-474e-9b36-f023e58a27b0,
  title={Nickel carriers in laterite ores and the},
  author={Pedro Paulo Medeiros Ribeiro and Reiner Neumann},
  year={2026},
  language={en}
}
TY  - JOUR
TI  - Nickel carriers in laterite ores and the
AU  - Pedro Paulo Medeiros Ribeiro
AU  - Reiner Neumann
PY  - 2026
LA  - en
ER  -

Similar Items

Optimization of Integrated Steel Plant R

This paper addresses the challenge of assessing the feasibility of wind power plant projects at sites with insufficient or no local historic wind data

2025enPDF

Design for Recovery of Precious and Base

2026enPDF

Electrochemical techniques for a cleaner

Important advances in electrochemical engineering technology over the last three decades have fostered the development of a lternative methods to alle

2026enPDF

Environmental and Human Health Risks Ass

2026enPDF

The Recovery of Precious and Base Metals

Increasing volumes of waste printed circuit boards from obsolete electronic equipment posed escalating environmental risks and resource losses due to

2026enPDF

Treatment of manufacturing scrap TV boar

The leachability tests for manufacturing scrap TV boards (STVB) have indicated the release of metals beyond the limit levels with potential problems f

2026enPDF