PDF

Evaluation of saponins as acid mist supp

C.Y. Cheng, M.D. Urbani

2026enacid mistzinc electrowinningsurfactant

Abstract

Language:

Generation of acid mist is a major concern in zinc electrowinning (EW) due to its detrimental effects on worker's health, the environment and plant infrastructure. One of the effective methods for acid mist control is to form a foam layer above the electrolyte surface by using surfactants. In this work, two saponin-rich products (Mistop® and QLZinc®) and a commercial Licorice product were evaluated and compared as acid mist suppressants in zinc EW. Foam properties, acid mist suppression, phase separation in solvent extraction, cathode current efficiency (CE) and cathode quality were correlated to the addition of these surfactants. Foam properties studied included minimum soluble solids dosage for 100% foam coverage, time required to achieve 100% foam coverage and foam persistence time. The two saponin-rich products were found to be more effective foaming agents than Licorice. Based on foam property tests, the recommended soluble solids dosage was 1.8, 3.8 and 21.6 ppm for Mistop®, QLZinc® and Licorice, respectively. At these dosages, acid mist suppression was 99% for both Quillaja products and 94% for Licorice. Foam coverage of 100% was achieved with 1.0 ppm of saponins when Mistop® was added, compared with 0.5 ppm of saponins when QLZinc® was added, suggesting that QLZinc® contains other Quillaja solids which are surface active and positively contribute to improve the quality of foam produced. For all three acid mist suppressants tested, no significant changes in phase disengagement time and interfacial tension were detected when an organic solution was separately contacted with the zinc electrolytes containing the three agents. The CE for the solutions containing 1.8, 3.8 and 21.6 ppm soluble solids of Mistop®, QLZinc® and Licorice were 91.4%, 92.5% and 92.6%, respectively. These values were slightly lower than for the blank solution (92.8%). Zinc deposit quality was also affected slightly by all three agents tested. Overall, it is concluded that under the current testing conditions, Quillaja products, at much lower soluble solids dosage, performed very well and better than Licorice.

Download

Cite This Work

@article{6d68145e-e534-499b-9ddf-ab2bbc11e16e,
  title={Evaluation of saponins as acid mist supp},
  author={C.Y. Cheng and M.D. Urbani},
  year={2026},
  language={en}
}
TY  - JOUR
TI  - Evaluation of saponins as acid mist supp
AU  - C.Y. Cheng
AU  - M.D. Urbani
PY  - 2026
LA  - en
ER  -

Similar Items

Metal Casting Processes

Unknown, Unknown

This chapter discusses metal casting processes, highlighting the diversity and common characteristics among them. The objective is to elucidate the fu

2023enPDF

The Nature of Solid Iron and Its Grain Structure

Unknown, Unknown

This study focuses on the fundamental characteristics of solid iron, which is predominantly composed of iron atoms and provides a basis for understand

2023enPDF

775134358 PROJET METALLURGIE GENERALE POURBAIX

2026enPDF

842063941 SX configuration

2026enPDF

758686865 Procedes metallurgique speciaux

Ir. Méshac KIME ILUNGA

Ce document traite des procédés métallurgiques spéciaux, en mettant particulièrement l'accent sur l'extraction liquide-liquide, un processus mis au po

2026enPDF

729490895 TFC Jordi kayombo

Copper solvent extraction units at large hydrometallurgical plants face constraints in metal recovery, phase disengagement, and reagent consumption, d

2026enPDF