PDF

CAPACITY AND PRODUCT QUALITY OPTIMIZATION OF THE SYAMA ROASTER

A. Charitos, C. Mattich, J. Hammerschmidt, J. Wilson, T. Kerr, D. Landwehr

2017engold roastingfluidized bedrefractory oresprocess optimizationsulphide oxidationcarbon-in-leach

Abstract

Language:

In refractory gold concentrates, gold is occluded in sulphide minerals preventing efficient cyanide leaching. Hence, roasting is used to oxidize sulphur and organic carbon, the latter being necessary to minimize recovery loss through the preg-robbing effect. In 2009, Outotec commissioned the circulating fluidized bed roaster at Syama gold mine in Mali. Since 2013 Resolute and Outotec have been implementing improvements to the roaster performance with the capacity increasing from 8000 t/month in 2013 to above 13,000 t/month in 2016, while achieving a residual sulphide sulphur and organic carbon contents of below 0.1 wt.% and 0.4 wt.%, respectively. Thus a gold recovery in the CIL of above 90% is attained. In 2016, Outotec audited the Syama roaster. The analysis resulted in the Low Carbon Roaster (LCR) upgrade concept which (i) allows re-processing of calcine dust from the spray cooler and ESP after pelletization and (ii) allows the roasting of a further fine-organic carbon rich feed, i.e. de-slime circuit tailings. The LCR upgrade aims to reduce organic carbon to <0.2 wt.% and increase roaster-leaching gold recovery by >3%. Project development included extensive testwork. The LCR process is expected to become operational during FY 2019.

Download

Cite This Work

@article{705ee93b-d001-4cb4-b370-30398d1033ba,
  title={CAPACITY AND PRODUCT QUALITY OPTIMIZATION OF THE SYAMA ROASTER},
  author={A. Charitos and C. Mattich and J. Hammerschmidt and J. Wilson and T. Kerr and D. Landwehr},
  year={2017},
  language={en}
}
TY  - JOUR
TI  - CAPACITY AND PRODUCT QUALITY OPTIMIZATION OF THE SYAMA ROASTER
AU  - A. Charitos
AU  - C. Mattich
AU  - J. Hammerschmidt
AU  - J. Wilson
AU  - T. Kerr
AU  - D. Landwehr
PY  - 2017
LA  - en
ER  -

Similar Items

Hot Gases Circulation in Metallurgical Fluid Bed Roasters 20250328

Roger Rumbu

This paper provides a detailed investigation into the role of hot gas circulation in metallurgical fluid bed roasters, aiming to enhance heat and mass

2026enPDF

Effect of Roasting Temperature for Copper Leaching of Sulfide Concentrate by Combined Methods

Lkhamtogmid Nyamjargal, Ganbat Batdemberel, Gunchin Burmaa, Dashdendev Burmaa

This study was undertaken to develop a cost-effective method of copper leaching in sulfide concentrate involving minerals as chalcopyrite and pyrite.

2018enPDF

Advances in Thermochemical Synthesis and Characterization of the Prepared Copper/Alumina Nanocomposites

Marija Korac, Željko Kamberovic, Zoran Andic and Srecko Stopic

This paper presents thermochemical synthesis of copper/alumina nanocomposites in a Cu-Al2O3 system with 1–2.5 wt.% of alumina and their characterizati

2020enPDF

Recovery of copper from alkaline glycine leach solution using solvent extraction

B.C. Tanda, E.A. Oraby

Glycine solutions in an alkaline environment have been shown to be able to leach copper from its oxide, native and sulfide minerals as a copper glycin

2017enPDF

Role of microorganisms in bioleaching of rare earth elements from primary and secondary resources

Homayoun Fathollahzadeh, Jacques J. Eksteen, Anna H. Kaksonen, Elizabeth L. J. Watkin, Homayoun Fathollahzadeh & Jacques J. Eksteen & Anna H. Kaksonen & Elizabeth L. J. Watkin

In an era of environmental degradation, and water, and mineral scarcity, enhancing microbial function in sustainable mining has become a prerequisite

2018enPDF

Surfactant-aided coal dust suppression: A review of evaluation methods and influencing factors

Guang Xu, Yinping Chen, Jacques Eksteen, Jialin Xu

There is an increasing trend in the occurrence of coal worker's pneumoconiosis even in developed countries such as the US and Australiawho have believ

2018enPDF