Evangelos Petrakis, Georgios Bartzas
This laboratory study investigates selective grinding and beneficiation options for a Greek bauxite ore. First, a series of batch grinding tests were carried out in order to investigate the grinding behavior of the ore and the effect of the material filling volume (f c) on the distribution of aluminium- and iron-containing phases. Then, the ground ore was subjected to magnetic separation either as received or after reduction roasting in order to further explore potential beneficiation options. The results showed that grinding of the ore exhibits non-first order behavior, while the breakage rate varies with grinding time. Additionally, Al2O3 tends to concentrate in the coarser than 0.300 mm product fraction, while fc 10% and 2 min of grinding time are considered optimum conditions for good distribution of Al2O3 and Fe2O3. When different product fractions were subjected to magnetic separation, it was seen that the non-magnetic product obtained from the 0.300–1.18 mm fraction was more rich in Al 2O3. In this fraction, the Al 2O3 content increased from 58 wt% in the feed to 67.9 wt%, whereas the Fe2O3 content decreased from 22.4 wt% in the feed to 13.5 wt%. When the ore was subjected to a two-step treatment, involving reduction roasting followed by magnetic separation, the Fe2O3 grade decreased from 20.8 to 5.1 wt%, but in this case the recovery was very low.
@article{7465d481-396b-43ff-a8cf-6bc06148dc2a,
title={Grinding Behavior and Potential Beneficiation Options of Bauxite Ores},
author={Evangelos Petrakis and Georgios Bartzas},
year={2020},
language={English}
}TY - JOUR TI - Grinding Behavior and Potential Beneficiation Options of Bauxite Ores AU - Evangelos Petrakis AU - Georgios Bartzas PY - 2020 LA - English ER -
John Chadwick
This article surveys contemporary technological developments aimed at enhancing the efficiency, selectivity, and sustainability of gold extraction and
Osvaldo Pavez, Pablo Herrera
Copper slag flotation was studied on an industrial scale at a concentrator plant in the region of Atacama, Chile. This study consisted of the physical
Cleophace Ngoie Mpinga
The thesis investigates alternative extraction strategies for platinum group metals (PGMs) from low-grade, high-chromium oxidized ores, which are incr
Gupta, A. and D.S. Yan
This work provides a comprehensive introductory treatment of mineral processing with a strong emphasis on the practical design and operation of benefi
FATHI HABASHI
In the past few years, extractive metallurgy has been advancing gradually, despite the absence of remarkable new ideas. This paper aims to summarize t
Copper oxide minerals are normally extracted by acidic leaching followed by copper recovery with solvent extraction and electrowinning. However, coppe