E. Nassef, A. Mahmoud
The present study aims to removal of copper ions (Cu2+) as a heavy metal from aqueous solution by a high inorganic molecular weight compound. This compound is modified clay (activated bentonite) which is used in oil well drilling, and obtained from local company. The experimental results showed that it is an adsorption reaction that follows Langmuir isotherm model. The maximum removal of copper ions was obtained at low copper ion initial concentration, high adsorbent dosage, low temperature, and high agitation speed. It is clear from the results obtained that the compound within the experimental range investigated cannot be considered as a method for the removal of waste stream although the experimental range investigated as the residual concentration is higher than the limits which are allowed by the environmental limits which are allowed by the low which is 5 pm. These results may be due to the high initial copper concentration used in this work and low dosage of the compound.
@article{7c35b876-bbfa-4edc-97c7-4b01b841d92a,
title={Removal of Copper Ions from Liquid Waste},
author={E. Nassef and A. Mahmoud},
year={2026},
language={en}
}TY - JOUR TI - Removal of Copper Ions from Liquid Waste AU - E. Nassef AU - A. Mahmoud PY - 2026 LA - en ER -
Important advances in electrochemical engineering technology over the last three decades have fostered the development of a lternative methods to alle
The leachability tests for manufacturing scrap TV boards (STVB) have indicated the release of metals beyond the limit levels with potential problems f
Mark E. Schlesinger, Matthew J. King
This book presents a comprehensive overview of the principles and practices of copper extraction metallurgy. The objective is to provide both a theore
Copper solvent extraction units at large hydrometallurgical plants face constraints in metal recovery, phase disengagement, and reagent consumption, d
Introduction Concerns over air pollution and the environmental problem of acid rain have made governments all over the world tighten their regulations
This paper addresses the challenge of assessing the feasibility of wind power plant projects at sites with insufficient or no local historic wind data