PDF

Metals Recovery: Study of the Kinetic Aspects of Copper Acidic Leaching Waste Printed Circuit Boards from Discarded Mobile Phones

Martina Laubertová, Bora Derin

2019encoppermetallurgyleachingrecyclingwaste

Abstract

Language:

This study was performed to investigate the possibility of copper recovery from the waste printed circuit boards (WPCBs) of waste mobile phones using a hydrometallurgical route as cleaner technology for environmental protection. In recycling, elements such as copper and aluminium are recovered, as well as the precious metals gold, silver, platinum and palladium, which can be recouped profitably from electronic waste and make this waste very valuable for recycling. In the experiments, the conventional agitated acid leaching method was used for mechanically pre-treated WPCBs with a mean Cu content of 19.09 wt % in a sulphuric acid medium with the presence of Fe3+ as an oxidant. The effects of Fe2(SO4)3 concentration, leaching time, temperature and the ratio of liquid to solid phase on the recovery of copper from the solutions were studied. The highest Cu extraction was achieved at 363 K after 15 min of leaching, and a liquid to solid ratio (L/S) of 20. The value of activation energy (Ea), which was found to be ~14.87 kJ.mol-1, indicates that this process is diffusion controlled. The apparent order of reaction with regard to the initial Fe2(SO4)3 concentration at 313 K was calculated as 0.55. The proposed scheme of copper recovery from WPCBs of mobile phones was designed.

Download

Cite This Work

@article{7e9a2247-6966-48a4-a440-0b30c3a35909,
  title={Metals Recovery: Study of the Kinetic Aspects of Copper Acidic Leaching Waste Printed Circuit Boards from Discarded Mobile Phones},
  author={Martina Laubertová and Bora Derin},
  year={2019},
  language={en}
}
TY  - JOUR
TI  - Metals Recovery: Study of the Kinetic Aspects of Copper Acidic Leaching Waste Printed Circuit Boards from Discarded Mobile Phones
AU  - Martina Laubertová
AU  - Bora Derin
PY  - 2019
LA  - en
ER  -

Similar Items

Recovery of copper from alkaline glycine leach solution using solvent extraction

B.C. Tanda, E.A. Oraby

Glycine solutions in an alkaline environment have been shown to be able to leach copper from its oxide, native and sulfide minerals as a copper glycin

2017enPDF

Towards industrial implementation of glycine-based leach and adsorption technologies for gold-copper ores

J. J. Eksteen, E. A. Oraby

The technology to selectively leach gold, silver and base metals from ores, concentrates, and wastes, using an alkaline glycine solution, has initiat

2017enPDF

An investigation into the leaching behaviour of copper oxide minerals in aqueous alkaline glycine solutions

B.C. Tanda, J.J. Eksteen

Copper oxide minerals are normally extracted by acidic leaching followed by copper recovery with solvent extraction and electrowinning. However, coppe

2016enPDF

Effect of Roasting Temperature for Copper Leaching of Sulfide Concentrate by Combined Methods

Introduction Concerns over air pollution and the environmental problem of acid rain have made governments all over the world tighten their regulations

2023enPDF

HYDROMETALLURGICAL PROCESS FOR EXTRACTION OF METALS FROM ELECTRONIC WASTE-PART I: MATERIAL CHARACTERIZATION AND PROCESS OPTION SELECTION

Željko Kamberović, Marija Korać, Dragana Ivšić, Vesna Nikolić, Milisav Ranitović

Used electronic equipment became one of the fastest growing waste streams in the world. In the past two decades recycling of printed circuit boards (P

2009enPDF

Treatment of manufacturing scrap TV boar

The leachability tests for manufacturing scrap TV boards (STVB) have indicated the release of metals beyond the limit levels with potential problems f

2026enPDF