PDF

Corrosion behavior of NiTi alloy in fetal bovine serum

Ruiqiang Hang, Shengli Ma

2010encorrosionNiTibiomaterialsfetal bovine serumelectrochemistry

Abstract

Language:

The corrosion behavior of NiTi alloy in fetal bovine serum (FBS) at 37 ◦ C is investigated using open circuit potential (OCP), electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma mass spectrometry (ICP-MS). The presence of FBS moves the OCP to the negative direction and makes the oxide film thinner and more porous than that in phosphate buffer saline (PBS, pH = 7.4). The impedance of the oxide film formed in FBS is smaller than that in PBS, but the total interface impedance is bigger in FBS because of the formation of a surface bio-film. Pits form on the NiTi alloy after immersion in FBS for 200 h but they are not observed on the sample immersed in PBS. XPS shows that the composition of the oxide film formed in FBS is similar to that formed in PBS and it is composed of mainly Ti oxides with a small amount of Ti hydroxide. Hydrated Ti is observed on the outermost surface of the NiTi alloy. The thickness of the oxide film on the NiTi alloy immersed in PBS is 17 ± 3.0 nm and that on the sample immersed in FBS is 10 ± 3.2 nm. The results are consistent with those obtained by EIS. The presence of FBS can accelerate leaching of Ni ions and the mechanism is investigated and discussed.

Download

Cite This Work

@article{940bdf2f-7c2c-4ec0-a3f0-fc7d54909175,
  title={Corrosion behavior of NiTi alloy in fetal bovine serum},
  author={Ruiqiang Hang and Shengli Ma},
  year={2010},
  language={en}
}
TY  - JOUR
TI  - Corrosion behavior of NiTi alloy in fetal bovine serum
AU  - Ruiqiang Hang
AU  - Shengli Ma
PY  - 2010
LA  - en
ER  -

Similar Items

Electrochemical techniques for a cleaner

Important advances in electrochemical engineering technology over the last three decades have fostered the development of a lternative methods to alle

2026enPDF

640069

Roger Rumbu

2025enPPTX

Materials for Nuclear Plants

W. Hoffelner

Structural materials must be able to operate under demanding exposure conditions, particularly for advanced nuclear plants where challenges arise from

2013enPDF

THE FUTURE OF ELECTRONIC WASTE RECYCLING IN THE UNITED STATES: Obstacles and Domestic Solutions

Jennifer Namias, Dr. Nickolas J. Themelis

This study explores the future of electronic waste recycling in the United States, addressing the challenges and proposing domestic solutions. The rap

2013enPDF

Extractive Metallurgy 1

Alain Vignes

This book provides a comprehensive overview of the fundamental principles of extractive metallurgy, with a specific focus on basic thermodynamics and

2011enPDF

Extractive Metallurgy 2

Alain Vignes

Extractive metallurgy is a critical field that encompasses the processes involved in the extraction of valuable metals from their ores. This work serv

2011enPDF