B.T. Taimasov, B.K. Sarsenbayev
The article presents the obtaining results of clinkers of sulfate resistant and road cement during the production tests process. The usage of man-made wastes such as lead slag, coal mining waste as well as clay component and additives. X-ray, chemical analyzes of starting materials, clinkers and obtained cements were carried out. The regularities of charge compositions, saturation coefficient, modules, burning regimes on chemical and mineralogical composition and quality of clinkers and cements, improvement of rotary kiln operation, reduction of greenhouse gas emissions and fuel consumption are established. Various methods of analysis were used, calculations of raw mixtures composition were carried out according to the program "Shikhta" (designed to calculate the raw mix and the mineralogical composition of the clinker for the production of Portland cement. The program was developed in the V.G. Shukhov Belgorod State Technical University, Russia) and "Calculation of raw mixtures or CRM" (designed to calculate the raw mix of clinker. The program was developed in the M. Auezov South-Kazakhstan State University, Kazakhstan). The strength of factory and experimental cements was tested after 3, 7 and 28 days and after steaming.
@article{9654a187-27ee-455d-b6a4-5cdaddaffd6c,
title={Development and Testing of Low-Energy-Intensive Technology of Receiving Sulphate-Resistant and Road Portlandcement},
author={B.T. Taimasov and B.K. Sarsenbayev},
year={2017},
language={en}
}TY - JOUR TI - Development and Testing of Low-Energy-Intensive Technology of Receiving Sulphate-Resistant and Road Portlandcement AU - B.T. Taimasov AU - B.K. Sarsenbayev PY - 2017 LA - en ER -
The Australasian Institute of Mining and Metallurgy
This conference, held in Perth, Western Australia, focuses on the latest advancements in metallurgical processing plant design and operational strateg
Siddhartha Mukherjee
This book provides a comprehensive overview of the critical aspects of industrial process engineering and plant design, addressing the complexities an
Arthur C. Reardon
This publication, edited by Arthur C. Reardon and published by ASM International®, serves as a comprehensive guide in the field of materials science.
F.C. Campbell
This work explores the advancements in manufacturing technology specifically tailored for aerospace structural materials. The objective of the study i
Xiong Wu, Yu Zhang
Converting offshore wind energy into hydrogen is a promising approach to improving renewable energy utilization. Coordinated offshore and onshore oper
Bram van Duinen, Karin van der Wiel
Energy system models are increasingly dependent on representative climate input. Yet, a fundamental mismatch persists between the hundreds of simulate