PDF

Leaching of copper oxide with different acid solutions

N. Habbache, N. Alane

2009encopperleachingacidsdissolutionenvironmental

Abstract

Language:

In this study, the dissolution of CuO in HCl, H2SO4, HNO3 and citric acid solutions was investigated in a batch reactor employing parameters expected to affect the dissolution rate of copper such as stirring speed, temperature and acid concentration. It was found that 99.95% of copper was dissolved after 14 min with inorganic acids at 0.5 M, 25◦ C and l/s = 10 ml/g while more drastic operation conditions were needed to reach the same dissolution efficiency with citric acid solution. Anions seem to be involved in the surface reaction. The dissolution kinetics of CuO was examined according to heterogeneous model and it was found that the dissolution rate was controlled by surface chemical process in all cases.

Download

Cite This Work

@article{9ae84078-6cb9-4892-95d0-c8ba181eea72,
  title={Leaching of copper oxide with different acid solutions},
  author={N. Habbache and N. Alane},
  year={2009},
  language={en}
}
TY  - JOUR
TI  - Leaching of copper oxide with different acid solutions
AU  - N. Habbache
AU  - N. Alane
PY  - 2009
LA  - en
ER  -

Similar Items

Treatment of manufacturing scrap TV boar

The leachability tests for manufacturing scrap TV boards (STVB) have indicated the release of metals beyond the limit levels with potential problems f

2026enPDF

Effect of Roasting Temperature for Copper Leaching of Sulfide Concentrate by Combined Methods

Introduction Concerns over air pollution and the environmental problem of acid rain have made governments all over the world tighten their regulations

2023enPDF

Towars industrial implementation of glycine-based leach and adsorption technologies for gold-copper ores

J. J. Eksteen, E. A. Oraby, B. C. Tanda, P. J. Tauetsile, G. A. Bezuidenhout, T. Newton, F. Trask & I. Bryan, B. C. Tanda a, F. Trask and I. Bryan

The technology to selectively leach gold, silver and base metals from ores, concentrates, and wastes, using an alkaline glycine solution, has initiat

2017enPDF

Metals Recovery: Study of the Kinetic Aspects of Copper Acidic Leaching Waste Printed Circuit Boards from Discarded Mobile Phones

Martina Laubertová, Bora Derin, Jarmila Trpčevská, Klaudia Šándorová and Emília Sminčáková

This study was performed to investigate the possibility of copper recovery from the waste printed circuit boards (WPCBs) of waste mobile phones using

2019enPDF

Study on the influence of various factors in the hydrometallurgical processing of waste printed circuit boards for copper and gold recovery

Ionela Birloaga, Ida De Michelis, Francesco Ferella, Mihai Buzatu, Francesco Vegliò

This study investigates the hydrometallurgical recovery of copper and gold from waste printed circuit boards (WPCBs) using a sequential oxidative leac

2013enPDF

Leaching in extractive metallurgy 20251125 01

Roger Rumbu

This book provides a comprehensive treatment of leaching as a central unit operation in non‑ferrous extractive metallurgy, with particular emphasis on

2025enPDF