Yurii I. Kuznetsov, Galina V. Redkina
Protection of metals in neutral media with pH 5.0–9.0 (in humid atmospheres and various aqueous solutions) can be achieved by formation of thin coatings (up to several tens of nm) on their surfaces due to adsorption and more complex chemical interactions of organic corrosion inhibitors (OCIs) with the metal to be protected. The review contains three sections. The first section deals with coatings formed in aqueous solutions, while the second one, with those formed in organic and water-organic solvents. Here we consider metal protection by coatings mainly formed by the best-known classes of OCI (carboxylates, organophosphates and phosphonates) and estimation of its efficiency. The third section discusses the peculiarities of protection of metals in the vapor-gas phase, i.e., by volatile OCIs, and a relatively new type of metal protection against atmospheric corrosion by the so-called chamber inhibitors. OCIs with relatively low volatility under normal conditions can be used as chamber OCIs. To obtain a protective coating on the surfaces of metal items, they are placed in a chamber inside which an increased concentration of vapors of a chamber OCI is maintained by increasing the temperature. This review mainly focuses on the protection of iron, steels, copper and zinc.
@article{9f7848f6-a9fc-4543-9d5e-45d876fc6553,
title={Thin Protective Coatings on Metals Formed by Organic Corrosion Inhibitors in Neutral Media},
author={Yurii I. Kuznetsov and Galina V. Redkina},
year={2022},
language={English}
}TY - JOUR TI - Thin Protective Coatings on Metals Formed by Organic Corrosion Inhibitors in Neutral Media AU - Yurii I. Kuznetsov AU - Galina V. Redkina PY - 2022 LA - English ER -
Jean-Philippe Monchoux, Alain Couret
After a few decades of increasing interest, spark plasma sintering (SPS) has now become a mature powder metallurgy technique, which allows assessing i
Ahmed A. Al-Amiery, Wan Nor Roslam Wan Isahak
Corrosion is a major challenge in various industries and can cause significant damage to metal structures. Organic corrosion inhibitors are compounds
Andrew England, Athanasios Toumpis
The design life of welded structures and components extends into the very high cycle fatigue (VHCF) regime across various applications. However, the a
L. Aspola, R. Matusewicz
The platinum group metals (PGMs), i.e. ruthenium, rhodium, palladium, osmium, iridium, and platinum, are typically found in association with each othe
Tomasz Trzepieciński, Valentin Oleksik
Lightweight materials, such as titanium alloys, magnesium alloys, and aluminium alloys, are characterised by unusual combinations of high strength, co
Tomasz Trzepieciński
Sheet metal forming (SMF) is one of the most popular technologies for obtaining finished products in almost every sector of industrial production, esp