PDF

Mechanical Alloying of Fe-Al-Si Intermetallic Compounds Using Pure and Pre-Alloyed Powders

Petr Haušild, Jaroslav Čech

2019enintermetallic alloysmechanical alloyingSEMX-ray diffractionnanoindentation

Abstract

Language:

In this paper, ternary FeAl20Si20 (wt.%) intermetallic alloy was prepared by mechanical alloying from different feedstock materials. Various combinations of elemental as well as pre-alloyed feedstock powders were milled in hard-soft, soft-hard and hard-hard initial mixing conditions with the aim to optimize the mechanical alloying process especially speed-up the processing time. The microstructure, phase composition and mechanical properties after different time of mechanical alloying were characterized. The effect of using the pre-alloyed powders on kinetics of mechanical alloying and final phase composition is compared with the results obtained on batches prepared from elemental powders. Using of appropriate pre-alloyed powders can slightly speed-up mechanical alloying process, nevertheless it has no significant impact on the final properties of the alloy.

Download

Cite This Work

@article{ab9125de-b989-42b0-9d4c-b059e73e255d,
  title={Mechanical Alloying of Fe-Al-Si Intermetallic Compounds Using Pure and Pre-Alloyed Powders},
  author={Petr Haušild and Jaroslav Čech},
  year={2019},
  language={en}
}
TY  - JOUR
TI  - Mechanical Alloying of Fe-Al-Si Intermetallic Compounds Using Pure and Pre-Alloyed Powders
AU  - Petr Haušild
AU  - Jaroslav Čech
PY  - 2019
LA  - en
ER  -

Similar Items

A Study of Ferrospheres in the Coal Fly Ash

Danzandorj Sunjidmaa, Ganbat Batdemberel

Coal fly ash is an industrial by-product produced from coal combustion in thermal power plants. It is a complex anthropogenic material consisting of v

2019enPDF

Advances in Thermochemical Synthesis and Characterization of the Prepared Copper/Alumina Nanocomposites

Marija Korac, Željko Kamberovic, Zoran Andic and Srecko Stopic

This paper presents thermochemical synthesis of copper/alumina nanocomposites in a Cu-Al2O3 system with 1–2.5 wt.% of alumina and their characterizati

2020enPDF

BLAST FURNACE IRONMAKING: Analysis, Control, and Optimization

Ian Cameron, Mitren Sukhram

This book delves into the intricate processes involved in blast furnace ironmaking, emphasizing the analysis, control, and optimization of operations.

2020enPDF

Process Engineering and Plant Design

Siddhartha Mukherjee

This book provides a comprehensive overview of the critical aspects of industrial process engineering and plant design, addressing the complexities an

2022enPDF

Artificial intelligence-aided materials design: AI-algorithms and case studies on alloys and metallurgical processes

Rajesh Jha, Bimal Kumar Jha

This book describes the application of artificial intelligence (AI) and machine learning (ML) concepts to develop predictive models that can be used t

2022enPDF

Crystal Structural Investigations of Mongolian Natural Zeolites

G.Batdemberell, Sh.Chadraabal

We have studied zeolitic rocks discovered in Mongolia using electron microscopy (SEM), X-ray fluorescence (XRF), and X-ray diffraction (XRD) methods.

2010enPDF