N. Ebrahimi, J.J. Noël
The initiation and propagation of crevice corrosion on the BC1 nickel-chromium-molybdenum alloy has been studied galvanostatically in concentrated chloride solution at 120 °C, and the distribution of corrosion damage determined using surface analytical techniques. The distribution of damage was dependent on the applied current and showed an increased tendency to spread across the surface as the applied current was increased. Attempts to induce repassivation by galvanodynamically reducing the current to zero were unsuccessful. Galvanic coupling to a large BC1 counter electrode showed propagation could be maintained by oxygen reduction on the coupled electrode at a slow rate for more than 1200 hours.
@article{b65e7454-3ba1-45f9-b659-c6429674e3d0,
title={The self sustaining propagation of crevi},
author={N. Ebrahimi and J.J. Noël},
year={2026},
language={en}
}TY - JOUR TI - The self sustaining propagation of crevi AU - N. Ebrahimi AU - J.J. Noël PY - 2026 LA - en ER -
This paper addresses the challenge of assessing the feasibility of wind power plant projects at sites with insufficient or no local historic wind data
Important advances in electrochemical engineering technology over the last three decades have fostered the development of a lternative methods to alle
Increasing volumes of waste printed circuit boards from obsolete electronic equipment posed escalating environmental risks and resource losses due to
The leachability tests for manufacturing scrap TV boards (STVB) have indicated the release of metals beyond the limit levels with potential problems f