eversvd,+ETj+02

In this study, the rate of seepage flow through the dam was investigated using both experimental and numerical modeling techniques. Two different types of soil samples were collected at a depth of 1 m from the Auchi site in Edo State, Nigeria. The soil samples were subjected to preliminary tests such as the sieve analysis, the limit state (liquid limit, plastic limit and plasticity index), and the specific gravity test. Notable differences in the geotechnical properties of two samples of soils were observed. The sieve analysis indicated that the particles passing through a 200-sieve number of size 0.075mm were 14.32% and 13.48% respectively. The liquid limit of sample 1 and sample 2 was determined to be 35% and 30%, the plastic limit 20.5% and 24.3%, the plasticity index 14.5% and 5.7% and the specific gravity of the two samples 2.63 and 2.65 respectively. Shear test was conducted to obtain the bearing capacity of soil using Terzaghi principle thereafter, the finite element analysis was used by applying SEEP/W of the Geo Studio program to determine the rate of flow of seepage through the dam. The result of the analysis showed that earthen dam without considering the core gave 12% difference in the seepage through the earthen material, the core of hydraulic conductivity 10 times less than that of the homogenous material gave 19.06% percentage difference seepage rate of flow with consideration of core with 10 times less than homogenous material and the core of hydraulic conductivity 100 times less gave 17.86% percentage difference for core of k 100 times less than homogenous material. Recommendations were made based on these results to reduce the rate of flow of seepage through the dam.