Ilkay Kinas, Engin Tan
Many processes with technological differences are used in the production of copper wire rods. In this study, wire drawing process was applied to oxygen bearing copper (ETP-Electrolyte Tough Pitch) wire rods produced by Contirod continuous casting process, oxygen-free electrolytic copper (OFC-Oxygen Free Copper) wire rods produced by Up-Cast continuous casting method and three different alloyed copper (CuSn0.18, CuMg0.5, CuAg0.10) wire rods also produced by Up-Cast continuous casting method. Tensile and conductivity tests were carried out to determine the effect of oxygen content on mechanical properties and product quality. Microstructure investigations were also carried out to determine the metallographic properties of the produced wires. As a result of the study, it was seen that the oxygen content had significant effects on the product quality and the mechanical properties, and also the most breakage occurred in oxygen bearing copper (ETP) in wire drawing process. In the study, it was determined that the oxygen content had no effect on the conductivity properties of copper wire.
@article{d39ef885-f7b5-4ed2-b11d-c8e30a5e6681,
title={The Effect of Oxygen Content on Mechanic},
author={Ilkay Kinas and Engin Tan},
year={2026},
language={en}
}TY - JOUR TI - The Effect of Oxygen Content on Mechanic AU - Ilkay Kinas AU - Engin Tan PY - 2026 LA - en ER -
Robert A. Francis
This document serves as a comprehensive introduction to the metallurgy of steel and its alloys, focusing on various aspects of iron and steel manufact
Unknown, Unknown
This chapter discusses metal casting processes, highlighting the diversity and common characteristics among them. The objective is to elucidate the fu
Unknown, Unknown
This study focuses on the fundamental characteristics of solid iron, which is predominantly composed of iron atoms and provides a basis for understand
Ir. Méshac KIME ILUNGA
Ce document traite des procédés métallurgiques spéciaux, en mettant particulièrement l'accent sur l'extraction liquide-liquide, un processus mis au po
Copper solvent extraction units at large hydrometallurgical plants face constraints in metal recovery, phase disengagement, and reagent consumption, d