J.B. Bajat, V.B. Mi ˇskovi´c-Stankovi´c
The adhesion and electrochemical properties of epoxy coatings electrodeposited on hot-dip galvanized steel with and without passive films were investigated during exposure to 3% NaCl. The passive films were formed in hot air, in boiling water and by chromating. Adhesion was measured both by a standardized pull-off method and by swelling in N-methyl pyrrolidone. Pretreatment of hot-dip galvanized steel with passive film formed in hot air increases both dry and wet adhesion strength of the epoxy coating compared to pretreatment with passive film formed in boiling water and chromate coating. The overall increase of wet adhesion for this sample was maintained throughout the whole investigated time period. It was shown that the change in adhesion of epoxy coating on a chromate coating is smallest of all investigated samples, although the initial value of adhesion on this surface had the lowest value. The corrosion stability of coated Zn samples pretreated by different methods, was investigated by electrochemical impedance spectroscopy and in the initial time of exposure to NaCl the highest values of pore resistance were also obtained for the epoxy coating on Zn pretreated in hot air, whereas the epoxy coating on a HDG steel with a chromate coating showed the smallest change in electrochemical properties (pore resistance, coating capacitance, charge-transfer resistance) during prolonged exposure time.
@article{dd59251d-c898-4dc7-9bc1-c3286f785c8c,
title={The influence of zinc surface pretreatment on the adhesion of epoxy coating electrodeposited on hot-dip galvanized steel},
author={J.B. Bajat and V.B. Mi ˇskovi´c-Stankovi´c},
year={2007},
language={en}
}TY - JOUR TI - The influence of zinc surface pretreatment on the adhesion of epoxy coating electrodeposited on hot-dip galvanized steel AU - J.B. Bajat AU - V.B. Mi ˇskovi´c-Stankovi´c PY - 2007 LA - en ER -
A. Ryan, E. Johanson
The design of process plants for feasibility studies must address several key objectives, including feasibility and constructibility, while focusing o
David Pollard, Geoff Dunlop
The MetPlant 2008 conference focused on advancements in metallurgical processing of ores, emphasizing plant design, operation strategies, and innovati
The Australasian Institute of Mining and Metallurgy
This conference, held in Perth, Western Australia, focuses on the latest advancements in metallurgical processing plant design and operational strateg
MBUYA MWASHI JOSUE, MUSENGA OMBA VENUS
Ce projet académique s'inscrit dans le cadre des études en métallurgie générale, visant à explorer les procédés d'extraction des métaux à partir de mi
W. Hoffelner
Structural materials must be able to operate under demanding exposure conditions, particularly for advanced nuclear plants where challenges arise from
Msc. Shaymaa Mahmood
The evolution of mankind has been marked by the ability to utilize and develop various materials to meet human needs. This paper explores the signific