Alma Terlikbaeva, Nazigul Zhumakynbai
The development of efficient technologies for processing secondary technogenic raw materials represents a promising approach to replenishing vanadium resources. This study investigates the processes of sulfuric acid reductive leaching of vanadium from spent vanadium catalysts using oxalic acid and metallic iron as reducing agents. It was established that oxalic acid provides vanadium extraction of up to 95.2%, whereas the use of metallic iron (2–3 wt.% of the catalyst mass) enables a vanadium recovery rate of 91–92% at a solid-to-liquid ratio of 1:7 and pH 1.3–1.5, offering a more cost-effective alternative. Thermodynamic modeling of the V–Fe–P–SO4–C2O4–H2O system was performed using the Medusa software package over a pH range of 0–3. The results showed that vanadium(IV) predominantly exists as the VOSO4 complex in sulfuric acid solutions, whereas the formation of oxalate and phosphate complexes is thermodynamically insignificant. Iron(III) was found to exhibit a strong affinity toward phosphate ions, promoting their selective precipitation as an iron phosphate phase while maintaining vanadium in solution. The obtained results provide a scientific basis for the efficient preliminary separation of iron and vanadium and for improving the selectivity of subsequent vanadium sorption.
@article{dd958593-37ec-40df-a42b-4ca7b925895b,
title={2026 Terlikbaeva Reductive vanadium leaching from spent catalysts},
author={Alma Terlikbaeva and Nazigul Zhumakynbai},
year={2026},
language={en}
}TY - JOUR TI - 2026 Terlikbaeva Reductive vanadium leaching from spent catalysts AU - Alma Terlikbaeva AU - Nazigul Zhumakynbai PY - 2026 LA - en ER -
This paper addresses the challenge of assessing the feasibility of wind power plant projects at sites with insufficient or no local historic wind data
Important advances in electrochemical engineering technology over the last three decades have fostered the development of a lternative methods to alle
Increasing volumes of waste printed circuit boards from obsolete electronic equipment posed escalating environmental risks and resource losses due to