PDF

BENEFICIATION OF BRASS ASHES

S. Timur, I. Duman

1986enbrassrecyclingzinccopperleaching

Abstract

Language:

Slags formed during brass smelting contain a significant amount of metallic value. The glassy and oxidized portion of the ground slag, usually referred to as "brass ash", consists of compounds such as ZnO, ZnO-SiO2, Cu-Zn, CuO, Cu and Zn/Cu/B oxide, and its colored-metal content may vary between 28-52% Zn and 8-16% Cu. These ashes are classified as harmful wastes, due to their high Zn content, and are considered to be secondary raw materials that should be treated accordingly, from an economical viewpoint. The aim of this experimental study is to investigate the possibilities of beneficiating brass ashes by treating it with H2SO4 or (NH4)2CO3+ NH4OH mixtures. Effects of temperature, air sparging and addition of oxidizing agents, such as MnO2 and Fe2(SO4)3, are investigated on copper and zinc leaching recovery. As a result of both acidic and alkaline leaching experiments, it is observed that more than 90% of Zn and more than 65% of Cu was leached out. Two separate process flow sheets are proposed for the possible treatment of brass ashes.

Download

Cite This Work

@article{e7361d3e-49c9-463e-b3b9-4bb72b700e80,
  title={BENEFICIATION OF BRASS ASHES},
  author={S. Timur and I. Duman},
  year={1986},
  language={en}
}
TY  - JOUR
TI  - BENEFICIATION OF BRASS ASHES
AU  - S. Timur
AU  - I. Duman
PY  - 1986
LA  - en
ER  -

Similar Items

Treatment of manufacturing scrap TV boar

The leachability tests for manufacturing scrap TV boards (STVB) have indicated the release of metals beyond the limit levels with potential problems f

2026enPDF

Metals Recovery: Study of the Kinetic Aspects of Copper Acidic Leaching Waste Printed Circuit Boards from Discarded Mobile Phones

Martina Laubertová, Bora Derin, Jarmila Trpčevská, Klaudia Šándorová and Emília Sminčáková

This study was performed to investigate the possibility of copper recovery from the waste printed circuit boards (WPCBs) of waste mobile phones using

2019enPDF

Recovery of precious metals from e waste

Printed circuit boards (PCBs) from electronic gadgets at the end of their useful life period are currently being dumped in landfills or incinerated, c

2026enPDF

775134358 PROJET METALLURGIE GENERALE POURBAIX

2026enPDF

FEASIBILITY STUDY FOR RECOVERING PRECIOUS METALS FROM E-WASTE

ROPAFADZO JAMAKANGA

Printed circuit boards (PCBs) from electronic gadgets at the end of their useful life period are currently being dumped in landfills or incinerated, c

2014enPDF

Effect of Roasting Temperature for Copper Leaching of Sulfide Concentrate by Combined Methods

Introduction Concerns over air pollution and the environmental problem of acid rain have made governments all over the world tighten their regulations

2023enPDF