Hirofumi Sakanakura, Kenichi Ito
Adsorption parameters such as the distribution coefficient are required to predict the release behavior of contaminants using advection-dispersion models. However, for potentially contaminant-releasing materials (PCMs) such as dredged sludge and coal ash, these parameters cannot be obtained by conventional adsorption tests. This study developed a method to determine adsorption parameters for PCMs from a set of batch tests conducted in parallel as a function of the liquid-solid ratio (LS-parallel test). This LS-parallel test was performed on sandy soil derived from marine sediment using liquid-solid ratios from 1 to 300 L/kg. The water-contact time was also changed from 10 min to 28 d to elucidate the kinetics or equilibrium of contaminants released from the sample. Adsorption parameters were successfully obtained if the substance was under adsorption control. A column percolation test was performed to confirm the effectiveness of the obtained parameters. Good agreements were observed for SO4 2− and Br, but discrepancies remained for other substances such as F− and As suggesting that improvements are necessary in both the LS-parallel test procedure and the advection-dispersion model.
@article{eb86b3f8-050e-473f-91ed-8af5aac3eebf,
title={Determining Adsorption Parameters of Pot},
author={Hirofumi Sakanakura and Kenichi Ito},
year={2026},
language={en}
}TY - JOUR TI - Determining Adsorption Parameters of Pot AU - Hirofumi Sakanakura AU - Kenichi Ito PY - 2026 LA - en ER -
Unknown, Unknown
This chapter discusses metal casting processes, highlighting the diversity and common characteristics among them. The objective is to elucidate the fu
Unknown, Unknown
This study focuses on the fundamental characteristics of solid iron, which is predominantly composed of iron atoms and provides a basis for understand
Ir. Méshac KIME ILUNGA
Ce document traite des procédés métallurgiques spéciaux, en mettant particulièrement l'accent sur l'extraction liquide-liquide, un processus mis au po
Copper solvent extraction units at large hydrometallurgical plants face constraints in metal recovery, phase disengagement, and reagent consumption, d
Non spécifié
L'hydrométallurgie du cuivre, principalement axée sur les minerais oxydés facilement solubles, s'applique également aux minerais sulfurés ou mixtes ap