N. Marcheschy, S. Urbietal
Mesophilic bacteria were enriched from samples collected from acid mine drainages in La Carolina (San Luis, Argentina). Two enrichments, E1 and E2, showed suitable rates of iron or sulphur oxidation, respectively. Both enrichment cultures were characterized by FISH and they were mainly composed by Leptospirillum ferrooxidans and Acidithiobacillus ferrooxidans. Studies with both, mixed and individual enrichment cultures, showed biooxidation (measured as iron solubilisation) of a refractory gold-bearing pyrite ore from Hualilán (San Juan, Argentina). Pyrite and sphalerite were the main mineral species in the ore with 7 % w/w and 8 % w/w of iron and zinc and approximately 25 ppm of gold. Leaching experiments (2 % w/v ore, 1.8 initial pH, 180 rpm and 30°C) were carried out with the addition of different alternative energy sources (6.67 g/L sulphur powder, 1 g/L iron(II), 0.02% w/v yeast extract). Redox potential, pH, iron(II) concentration and total Fe and Zn were measured regularly. A 100% of iron leaching (after 28 days in the best experimental condition) was observed in some of the cultures. In other systems high zinc release was obtained (100% of dissolution after 28 days in the best experimental condition). Our results strongly suggest that under the correct operating conditions, biooxidation pre-treatment can be used to recover zinc as a subproduct of gold extraction from refractory ore.
@article{ee65387d-ec28-4c20-968d-32b9fbb460ff,
title={Recovery of zinc during the pre treatmen},
author={N. Marcheschy and S. Urbietal},
year={2026},
language={en}
}TY - JOUR TI - Recovery of zinc during the pre treatmen AU - N. Marcheschy AU - S. Urbietal PY - 2026 LA - en ER -
Sadia Ilyas, Jae-chun Lee
The feasibility of biometallurgical processing for recovering heavy metals, precious metals, and rare earth elements from waste electrical and electro
This paper addresses the challenge of assessing the feasibility of wind power plant projects at sites with insufficient or no local historic wind data
Important advances in electrochemical engineering technology over the last three decades have fostered the development of a lternative methods to alle
Increasing volumes of waste printed circuit boards from obsolete electronic equipment posed escalating environmental risks and resource losses due to