PDF

Sulphide Reactivity Within Cemented Past

Serge Ouellet, Bruno Bussière

2026ensulphidereactivitycemented pastebackfilloxygen consumption

Abstract

Language:

Oxygen consumption tests were performed on 5 manufactured laboratory tailings containing approximately 4, 12, 22, 34 and 74% wt. of pyrite at different degree of saturation, and on the same tailings when incorporated into cemented paste backfill (CPB). Oxygen consumption results showed that tailings reactivity depends on pyrite content and degree of saturation. For CPB samples, oxygen consumption seems to be related also to type of binder. The results showed that the reactivity of a given paste backfill recipe does not significantly increase after 28 days of curing time. Comparing the oxygen consumption results of sulphide tailings and the corresponding paste backfill samples indicated that CPB samples are less reactive than the non-cemented manufactured tailings at degrees of water saturation less than 70%. However, at higher degrees of saturation, the oxygen consumption results of the manufactured tailings were similar and even less than the CPB samples. The results of this preliminary study demonstrate that CPB technology is a viable means to reduce the reactivity of sulphide tailings in surface disposal areas.

Download

Cite This Work

@article{f0139a34-c546-47c5-a9a4-0c5d2e7b37f8,
  title={Sulphide Reactivity Within Cemented Past},
  author={Serge Ouellet and Bruno Bussière},
  year={2026},
  language={en}
}
TY  - JOUR
TI  - Sulphide Reactivity Within Cemented Past
AU  - Serge Ouellet
AU  - Bruno Bussière
PY  - 2026
LA  - en
ER  -

Similar Items

Optimization of Integrated Steel Plant R

This paper addresses the challenge of assessing the feasibility of wind power plant projects at sites with insufficient or no local historic wind data

2025enPDF

Design for Recovery of Precious and Base

2026enPDF

Electrochemical techniques for a cleaner

Important advances in electrochemical engineering technology over the last three decades have fostered the development of a lternative methods to alle

2026enPDF

Environmental and Human Health Risks Ass

2026enPDF

The Recovery of Precious and Base Metals

Increasing volumes of waste printed circuit boards from obsolete electronic equipment posed escalating environmental risks and resource losses due to

2026enPDF

Treatment of manufacturing scrap TV boar

The leachability tests for manufacturing scrap TV boards (STVB) have indicated the release of metals beyond the limit levels with potential problems f

2026enPDF